Ways to Overclock Your Graphics Card

In addition, invest in performance-enhancing software explicitly designed for your gear to continue functioning normally. The term "overclocking" refers to progressively boosting your graphics card's clock speed to improve its overall performance. Overclocking the graphics processing unit (GPU) is similar to overclocking the central processing unit (CPU) in that it gradually increases the graphics card's core frequency while simultaneously testing its stability with a benchmarking tool and ensuring that it does not become overheated.

Overclock Your GPU

The overclocking process is not complicated and does not cost too much money. To overclock your GPU, you will only need two tools: one to conduct the actual overclocking and another to evaluate performance. You will use the overclocking tool to increase the clock rate of your GPU, and you will utilize the testing tool to benchmark and assess the effect that the modification has had on the performance.

First, you must ensure that your personal computer has been well optimized and is set up to perform to the best of its abilities. You may continue reading this article to learn more about the requirements for overclocking your GPU, or you can skip through our detailed instructions.

1. One Of The Best Overclocking Tools

MSI Afterburner is the most excellent tool for overclocking your video card since it is simple to use, features a skinnable interface if you prefer to customize it, and continually updates with the most recent GPUs.

2. A Standard Or A Stress-Testing Instrument

Because overclocking your video card causes it to work at its maximum capacity and causes a temperature rise, you need a program to test its performance and ensure that you are not putting it through excessive stress. In-game stability may be improved via the use of benchmarking and stress testing. Although overclocking is not very difficult, it needs patience, testing, and adjusting to find the optimal combination of performance, temperature, and compatibility with the games you play. You may believe you've achieved the ideal GPU or CPU overclock, only to discover that your favorite game, such as GTA V, may crash after just a few minutes of play. You should test again if this occurs after attempting a significantly lower lock rate.

How to Increase the Clock Speed of GPU?

To begin, launch the overclocking tool for your GPU; in this example, we're using MSI Afterburner. Your graphics chip's current clock speed will be shown on the primary dashboard, along with its memory capacity. This is referred to as the GPU Clock (Mem Clock). The temperature will be shown on the right-hand side. The temperatures may vary from computer to computer, but as a general guideline, you should avoid GPU and CPU readings higher than 90 degrees Celsius.

1. Benchmark Your Current Settings

Check your system's performance by running either the 3DMark or the Furmark benchmark. This enables you to evaluate your performance in terms of temperature, clock rates, and frames per second (FPS). Take a snapshot or write down these figures; doing so will assist you in comparing results at a later time.

2. Overclock Your GPU Chip

When overclocking your video card, it is essential to get off to a modest start. Performance should remain consistent at a level of 5 percent, although it's unlikely that you'll notice much of an improvement at this point. However, this little overclock you to check for any possible problems more rapidly.

3. Raise The Clock Speed Of Your GPU Memory

Memory is just as critical as the core clock speed of the GPU, if not more so, particularly in games that need terabytes of texture data. Try increasing the GPU memory speed by 10 percent, equivalent to 50 to 100 MHz. Any percentage lower than 10 percent ought to still provide reliable performance.

4. Fine-tune

After doing some light testing on the core clock and memory clock rate:

1. Proceed with the fine-tuning process by raising the GPU to overclock by an additional 10 MHz.
2. After each iteration, do stability and performance tests, and then start again.
3. Play a game, do a stress test, or run a benchmark for a few hours while keeping an eye out for problems and tracking progress.

5. Increase The Power Limit

When you have reached your limit, you can either maintain your clock at its current setting. Adjusting your graphics card's power limit settings in MSI Afterburner to a higher value.

6. Fine-Tune (Again) And Test

After unlocking even more power, raise your GPU to overclock once more by 10 MHz, being sure to test after each adjustment. Your card will likely climb higher than it did before it crashed. On our gaming computer, we could overclock the GPU to anywhere between +170 MHz and +450 MHz. It took us a lot of work to zero in on the optimal setting, so if you want good results, you'll need patience.